FAQ:

1 The motor runs but the sliding gate operator doesn't work.
A: Check whether the clutch is closed.

2 The power indicator light doesn't flash and the key doesn't
react.
A: Check whether power is connected right.
B: Check whether the fusel is burned, it yes, please exchange it.

3 The opening and closing limit can not work.
A: Check whether the limit adjustment switch is installed right.
B: Check whether the limit iron is installed right. Adjust the
position of the limit iron.

4 Crash proof is not effective.
A: Check whether the connection of crash proof is correct.
B: Check whether the photocell is installed right.
C: Check whether the connection of the wire of the loop
detector is right .

5 When the gate just close up, it turns to open.
A: Check whether the voltage is normal.
B: If the crash proof equipment is installed, please check
whether it works well.

6 The remote control doesn't work
A: Check whether the battery is low. If yes, change it.
B: Check whether the code of the remote control is the same
with the code of the control panel.

MAX Barrier is a global provider of parking gate system solutions

“We design and manufacture a range of barrier gate that protect critical infrastructure and public places from vehicle borne threats”

Vehicle security barriers, vehicle loop detector, UHF long rang reader, sliding automatic gates & turnstiles.

Our specialist parking gate system solutions have been successfully to protect perimeters and access points of critical infrastructure & public places including airports, oil & gas, financial institutes, government buildings, data centres, military bases, stadia and shopping malls.

Our reach is global with systems supplied to over 70 countries.